Grind Gage Chart

Catalog #Block SizePath Size# PathsScalesRangeName or Usual Application
251/2 x 2-1/2 x 4-3/4″1/2 x 2″2Hegman
Mils
8-0
0-5
Group of gages most commonly referred to as “Hegman Gages” used for a wide variety of paints and other compounds.
451/2 x 2-1/2 x 6-3/4″1/2 x 4″2Hegman
Mils
8-0
0-5
651/2 x 2-1/2 x 8″1/2 x 6″2Hegman
Mils
8-0
0-5
52511/2 x 2-1/2 x 6-3/4″1/2 x 5″2Microns
Mils
Hegman
0-25
0-1
8-6
Group of gages commonly referred to as “Paint Club Gages” most often used for paints, varnishes and lacquers. See ASTM Test Method D-1210, also Federal Test Method No. 141, Method 4411 Rev. C.
52521/2 x 2-1/2 x 6-3/4″1/2 x 5″2Microns
Mils
Hegman
0-50
0-2
8-4
52541/2 x 2-1/2 x 6-3/4″1/2 x 5″2Microns
Mils
Hegman
0-100
0-4
8-0
513/4 x 3-1/2 x 7-1/2″2 x 5″1Hegman
Microns
8-6
0-25
These gages have a single, wide path which aids in the discerning of contamination. This is a popular gage where “wet” master samples are not used for comparison.
523/4 x 3-1/2 x 7-1/2″2 x 5″1Hegman
Microns
8-4
0-50
543/4 x 3-1/2 x 7-1/2″2 x 5″1Hegman
Microns
8-0
0-100
6251/2-MU3/4 x 3-1/2 x 9-1/2″1 x 6-1/4″2Microns0-12-1/2Popular in foreign usage because of large size and micron calibration; this group includes the shallowest standard gage which is 12-1/2 microns, total range.
62513/4 x 3-1/2 x 9-1/2″1 x 6-1/4 “2Hegman
Microns
8-6
0-25
62523/4 x 3-1/2 x 9-1/2″1 x 6-1/4″2Hegman
Microns
8-4
0-50
62543/4 x 3-1/2 x 9-1/2″1 x 6-1/4″2Hegman
Microns
8-0
0-100
PD-2503/4 x 3-1/2 x 9-1/2″1 x 6-1/4″2Microns
Microns
0-50
0-250
Vinyl Dispersion Gage see SPI-VD-10
94841/2 x 2-1/2 x 6-3/4″1/2 x 5″2Microns
Microns
0-50
0-250
Smaller version of PD-250
PB-201/2 x 2-1/2 x 9-1/2″1/2 x 8″2Mils0-20Peanut Butter Gage
PB-301/2 x 2-1/2 x 9-1/2″1/2 x 8″2Mils0-30
PH-1253/4 x 1-1/2 x 8″1/2 x 6″1Microns0-125Pharmaceutical Gage
CMA-1853/4 x 2-1/2 x 12″1/2 x 10-1/2″2Microns
Microns
0-105
80-185
Chocolate Gage, Chocolate Manufacturers Ass’n.

 

Catalog NumberThickness, Width, LengthDescription
A-11/4 x 1-1/2 x 3-3/4″Two edges with .015″ radius making line contact. For 1-1/2″ through 3-1/2″ gages.
A-33/8 x 1-1/2 x 4-5/8″Two edges with .015″ radius making line contact. For 4″ and 4-1/2″ gages.
A-43/8 x 1-1/2 x 6-3/4″Two edges with .015″ radius making line contact. For FPBAA-C and some special gages.
IA-11/4 x 3-5/8″ wide with insulated handle for use with heated gages.
B-1Footed or block-type scraper for 2-1/2″ wide gages, one flat edge.
B-2Footed or block-type scraper for 3-1/2″ wide gages, one flat edge.
B-3Footed or block-type scraper for 4-1/2″ wide printing plates, one flat edge.
Warrem
Block
Scraper
Footed or block-type scraper for Warren wedge printing plates, one flat edge.
0