Selected:

Cross Cut Test Kit

$210.00$245.00

Cross Cut Test Kit

$210.00$245.00

The Cross-Cut Kit by Precision Gage & Tool Company provides almost everything you need to perform adhesion and flexibility tests to meet the standards of the ASTM test method D-3359.

Clear

Description

Cross Cut Testing Kit

The Cross-Cut Kit by Precision Gage & Tool Company provides almost everything you need to perform adhesion and flexibility tests to meet the standards of the ASTM test method D-3359. Each kit includes a blade, a blade holder/handle, a hex wrench for changing blades, an extra clamp screw, a small flaking and cleaning brush, a lighted magnifier and a roll of test tape. Additional blades and test tape are also available; call 937-866-9666 for other accessories not found on this website. 

Testing Materials and Procedure

The information below is taken from the included cross cut adhesion test kit instructions and is also available for download here.

Materials

The Cross-Cut Kit by Precision Gage & Tool Company provides almost everything you need to perform Adhesion and Flexibility Tests to meet the standards of ASTM Test method D-3359. In the kit, you’ll find a blade, a blade holder/handle, a hex wrench for changing blades, an extra clamp screw, a small flaking and cleaning brush, a lighted magnifier, and a roll of test tape. You’ll also need a rubber eraser on the end of a pencil.

Test Specimens

In the field, you’ll test the actual coated structure or article you want to evaluate. In the lab, you may apply the materials you’re testing to panels of the appropriate composition and surface conditions. Either way, the testing surface must be flat. You can check flatness with a straight edge such as a steel rule.

Report

Report the number of tests, their mean and range, and where the failure occurred—i.e., between the first coat and substrate, between the first and second coat, etc. Note the substrate used, the type of coating and the method of cure. If the adhesion strength of the tape has been determined in accordance with Test Methods D 10001 or D 33302, report the results with the adhesion ratings. Otherwise, report the specific tape used.

Additional information

Weight3 lbs
Dimensions13 × 8 × 8 in
blade-type

1.0 MM, 1.0 MM 6 Teeth Special, 1.5 MM, 2.0 MM, 3.0 MM, 5.0 MM

Close Menu
0
×

Cart